AUDI A1 GB Park Assist Retrofit Package - Upgrade from APS+ to PLA

AUDI A1 GB Park Assist Retrofit Package - Upgrade from APS+ to PLA

SKU: PLA-A1GB
Category: Ultrasonic parking sensors

Please enter chassis number:: Please enter chassis number:
Order sensors in body color?:

from

619,00 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Delivery time: 4 - 6 Workdays (DE - int. shipments may differ)

set

Description
Reviews
PDF (1)

Retrofit kit for retrofitting the original Audi Park Assist system in the Audi A1 GB

Suitable for all models equipped with front and rear parking sensors (PR equipment code 7X2)

Let your Audi A1 park itself! The original Audi Park Assist scans the left or right side of the road for a suitable parking space and notifies you once a sufficiently large space has been found. Now it’s time to take your hands off the steering wheel – from this moment, the PLA performs the parking maneuver for you!

⚠ Please provide the vehicle identification number (VIN) during the ordering process

Product details:

No difference compared to the factory-installed park assist system
Set includes original Audi sensors with mounting brackets
Distances to obstacles are displayed visually
Parking assistance is expanded to the environment display
Acoustic feedback when obstacles are detected
Automatic activation when reverse gear is engaged
Automatic activation at the front when obstacles are detected
PDC can additionally be activated via the button
Various parking modes available in PLA mode
Automatic parking space detection up to approx. 40 km/h

Compatibility:

Suitable for all Audi A1 GB vehicles already equipped with front and rear parking sensors

Please also note the following very important information

This retrofit kit CANNOT be used in vehicles that are already protected with SFD2!!

SFD stands for "Protection of Vehicle Diagnostics". Many vehicles from approximately model year 2024 are already equipped with SFD2, and changes to the vehicle configuration are currently not possible via standard diagnostics. Further information about SFD and SFD2 and whether your vehicle is affected can be found at the following link >> click here <<

Scope of delivery:

2x Original Audi PLA sensor front
2x Original Audi mounting bracket for PLA sensor front
2x Original Audi PLA sensor rear
2x Original Audi mounting bracket for PLA sensor rear
1x Original Audi switch strip with PLA button (depending on equipment)
1x Original Audi PLA control unit
1x Wiring harness PDC front bumper
1x Wiring harness PDC rear bumper
1x Wiring harness PLA switch strip
1x Additional parts depending on the vehicle identification number, e.g. trims, etc.
1x Connection and coding instructions

Installation time: approx. 6–7 hours

Installation information:

No replacement of the bumpers is required
The sensors are installed in the existing bumpers; the positions are marked inside the bumper
We recommend using a punching tool to create the openings; this can also be purchased or rented from us
After installation, the vehicle must be coded for the new equipment; these steps are included in our instructions. For coding, use VCDS, VCP, ODIS, or another vehicle-compatible diagnostic tool

Notes:

The retrofit kit is assembled by us based on the vehicle identification number and therefore specifically for your vehicle. You will receive all parts required for the retrofit. For this reason, the delivered contents may vary slightly and may differ from the parts shown in the photo
If the sensors are ordered painted in vehicle color, the delivery time will be extended by 2 days

Installation service available?

We also offer this item fully installed at a fixed price (additional charge 579 EUR). To arrange an appointment, please contact us via our CONTACT FORM. Please always include your vehicle identification number when making inquiries.

There are no reviews yet.

Produktsicherheit

Herstellerangaben:
AUDI AG
Auto-Union-Str. 1
85057 Ingolstadt, Deutschland

E-Mail: kundenbetreuung@audi.de
Web: www.audi.de

Produktsicherheit