Plug&Play Smartphone Interface with full integration into the vehicle’s multimedia system. Please check the compatibility list to see if a solution is available for your car.
The image is displayed full screen on the factory monitor, while the audio signal is fed into the original multimedia system via Audio AUX or Bluetooth A2DP. Please check before ordering whether your system has an Audio AUX input or supports Bluetooth A2DP.
Compatible with Apple CarPlay® and Android Auto for safe smartphone use in the vehicle. Operation via OEM buttons and control systems, voice control via Siri and OK Google using the included microphone. Navigation, messages, apps and music run directly on the vehicle display.
If a factory hands-free system is installed, it can continue to be used via the smartphone integration. Music streaming (e.g. Spotify or radio apps) while navigating is fully supported. Connection via USB or wirelessly via WiFi.
Wireless Apple CarPlay® supported from iPhone 5 via WiFi. “Wireless Google Android” is supported if Android 11, Android Auto 4.8 or higher and 5GHz WiFi are available.
FEATURES
- Interface for retrofitting Apple CarPlay® and Android Auto
- Operation via OEM vehicle buttons / touchpad
- Wireless Apple CarPlay® via included WiFi antenna from iPhone 5
- Wired Apple CarPlay® via USB (disable WiFi on iPhone)
- Wired Android Auto via USB
- Android MirrorLink function (mirroring the smartphone display)
- USB input for multimedia playback, software updates or wired smartphone connection
- HDMI input (audio only via Audio AUX output). Video playback on Apple iOS only via USB cable
- Supports RMVB, MOV, MKV, MP4, AVI, RM up to 1080p HD resolution
- Smartphone pairing required only during initial installation
- Integrated audio DSP with equalizer for sound output
- Analog audio output with 3V output voltage for sound playback (Audio AUX)
- Supports left-hand and right-hand drive vehicles
- "Apple Siri" and "OK Google" voice control via included microphone (no phone call function)
APPS
- GPS navigation with Google Maps and Apple Maps and many more
- Music playback with Spotify, Apple Music, Amazon Prime and many more
CAMERA FUNCTIONS
- Input for optional front and rear view cameras (AHD/CVBS) (except if the BMW has an 8.8" Alpine display installed (ALPINE ALxxxx, HW: 0013, FDV: 0022 or 0023))
- Supports factory parking sensors (PDC)
- Supports factory dynamic guide lines
- Supports factory camera systems
- Supports factory 360° camera systems
- 12 Volt output for power supply of the front camera
- 12 Volt output for power supply of the rear camera
COMPATIBILITY
| Vehicle |
Please check compatibility with your vehicle model, year and infotainment system before purchase.
Analog Audio AUX input is mandatory – incompatibility may cause damage.
|
| Smartphone Note |
Some manufacturers (e.g. Samsung) use customized Android-based systems – wireless use may not be possible.
|
| USB (wired) |
Apple iOS: minimum iPhone 5 or higher
Google Android: minimum Android 5.0 (Lollipop), recommended 6.0 (Marshmallow) or higher
|
| Wireless (WiFi) |
Apple iOS: minimum iPhone 5 or higher
Google Android: minimum Android 11, Android Auto 4.8 or higher, 5GHz WiFi required
|
TECHNICAL DATA
- Operating voltage: 12VDC +/-10%
- Maximum current consumption: 1.35A
- Standby current consumption: 2mA
- Current consumption when off: 0mA
- USB charging current: 1100mA
- Operating temperature: -25°C ~ +75°C
- Dimensions: 120x90x19mm
APPROVALS
- E-approval number E57*10R06/00*0081
- E-approval number E57*COP*0279
IMPORTANT PRODUCT NOTICE
- This product is controlled exclusively via buttons and does not support touchscreen or gesture control.
INSTALLATION NOTE
This product is intended for vehicles with a 12V battery. Do not install in vehicles with a different voltage. Never extend the HSD signal cables. This product consists of high-precision components and must not be exposed to strong impacts. Never open the housing. To ensure driving safety and avoid violations of traffic regulations, never operate the product while driving. Optional rear view cameras are only visible when reversing. Always pay attention to your surroundings and never rely solely on the camera. All installation steps must be carried out by a trained professional. During installation, the ignition must be switched off and the product must only be connected to power after complete wiring. NEVER plug or unplug cables while the system is powered on to avoid damage to the monitor or the product. Route cables so that they do not come into contact with metal edges. Damaged wiring may cause fire. Avoid contact with hot surfaces when wiring the main unit. High temperatures may damage the wiring and cause short circuits, arcs or fire. Do NOT install the product in a damp environment to prevent electric shock, damage or fire caused by short circuits. Upon receipt, please check whether all components are included in the packaging. If anything is missing, inform the supplier / manufacturer. Start the engine before use, check whether the interface functions are displayed correctly and verify that the vehicle interface operates properly. Provide feedback to the supplier / manufacturer if you have any questions. Handle removed vehicle parts carefully during installation and avoid scratching the dashboard. Unused connectors must be insulated to prevent short circuits. Cable connections must be securely plugged in. Avoid interfering with control components such as the steering wheel, accelerator and brake pedal.
LEGAL NOTICE
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google LLC. Third-party product and brand names may be registered trademarks of their respective owners.
DOWNLOADS
ℹ For a perfect fit: Please check the compatibility list before ordering.
Video Tutorials
German
Dutch
