GRA cruise control-systeem activeringsmodule Plug & Play, voor voertuigen met aparte gateway

SKU: MQB-PPGRA-GW
Categorie: T6.1

169,00 €

incl. 19% VAT , plus

Choose tax zone / country of delivery

Levertijd: ca. #LEVERTIJD# weken (DE - int. verzendingen kunnen verschillen)

deel

GRA Cruise Control Activation Module Plug & Play, for Vehicles with Separate CAN Gateway

To be used when retrofitting a cruise control system (including speed limiter) if NO activation document is used for unlocking via an Audi or Volkswagen authorized workshop.

Product Information:

When retrofitting the original cruise control system in the vehicles listed below, an activation document with license protection is normally required. This document is included exclusively with the original retrofit kit. Activation can only be carried out by an authorized dealership using this document. Once activated, the new equipment is stored in the factory database under your vehicle identification number (VIN) and the parts catalog is updated accordingly.

A simple activation via coding of the engine control unit and steering column electronics (e.g. using VCDS) is not possible for these vehicles. By using our Plug & Play GRA activation module, the complete retrofit of the original cruise control system – including speed limiter – can now be performed without an activation document. This not only reduces the cost of the retrofit kit but also eliminates dealership activation fees.

Everything required to retrofit cruise control:

Our Plug & Play GRA activation module
The appropriate steering column stalk with cruise control function – or
the appropriate steering wheel buttons including trim with cruise control function (available in our online shop)
A new accelerator pedal to deactivate the limiter function (available in our online shop)
(only required if the installed accelerator pedal does not have a kick-down switch position!)
GRA control wire (available in our online shop)

Compatible with:

MAN TGE
VW Arteon 3H (including facelift)
VW Crafter SY from MY 2016
VW Crafter SZ from MY 2016
VW Golf 7 (including facelift)
VW Passat B8 (including facelift)
VW T6.1 from MY 2020
VW Taigo CS
VW T-Cross C11
VW T-Cross D11
VW T-Roc A11
VW T-Roc D11
VW Tiguan AD1
VW Tiguan AX1
VW Tiguan BW2
VW Touran 5T
...additional vehicle models upon request!

Notes:

NOT suitable for vehicles where the CAN gateway is integrated in the BCM (e.g. VW Polo 6C, Seat Ibiza KJ, etc.). For these vehicles, please use our module with item number MQB-PPGRA-BCM
NOT suitable for vehicles with SFD and SFD2 (SchutzFunktionDiagnose)
NOT suitable for vehicles with electric or hybrid drive systems
Not sure which additional parts you need for the cruise control retrofit? Simply send us your inquiry including your VIN to Kundenservice@wibutec.de
PLEASE ALWAYS PROVIDE YOUR VEHICLE IDENTIFICATION NUMBER (VIN) WHEN ORDERING. ONLY THEN CAN WE SUPPLY THE CORRECT WIRING AND CODING INSTRUCTIONS.